Split the tractor between the engine and transmission. Once separated, remove the left brake pedal and the brake cross shaft. Use the diagram below to locate the spot to drill the shifter hole. The measurements should get the hole location within 1/8″ or closer of where it should be. You may want to use a…

Read More

Split the tractor. Remove the clutch fork and shaft. Remove the brake shaft. Remove the transmission input shaft and tube. If you’ve had a Sherman Step-Up installed before, you will have a shifter hole already drilled in the transmission case. If not, locate and drill a 1 1/4″ hole. Without a template to mark the…

Read More